PRO-SET epoxy Malta fabricators use for composite work is now stocked locally at DockShop. These infusion, laminating and structural systems are trusted worldwide for building strong, lightweight composite parts. PRO-SET builds the range especially for resin infusion, so professionals get high performance, clean application and durability in every project.
What Makes PRO-SET Good for Infusion Work
PRO-SET’s infusion epoxies are made for processes like vacuum bagging, RTM and VARTM. They flow smoothly into fiberglass, carbon fiber and other reinforcements. That reduces air pockets, and leaves clean, strong parts behind. Several hardener options let you control working time, so the resin stays workable for as long as a layup actually needs. The system is made under ISO 9001:2015 standards, giving consistent quality from batch to batch.
Where PRO-SET Epoxy Is Used
Thanks to its reliability and strength, several industries in Malta and beyond rely on PRO-SET epoxy Malta stocks locally:
- Marine and boatbuilding: boat hulls, decks and bulkheads need strong, waterproof materials, and PRO-SET delivers that.
- Automotive and racing: body panels, spoilers and moulds hold up under pressure and speed. See our full guide to PRO-SET for automotive work.
- Aerospace and UAVs: drones, small aircraft and composite airframes benefit from PRO-SET’s low weight and high strength. See our full guide to PRO-SET for aerospace work.
- Construction and architecture: lightweight panels, moulds and GRP cladding benefit from a dependable finish and bond.
- Renewable energy: wind turbine blades and tidal platforms face constant strain, and PRO-SET is built to last under it.
- Recreation and sport: paddleboards, surfboards and skis made with PRO-SET are lighter and tougher as a result.
What DockShop Stocks
DockShop carries the PRO-SET range locally, so a project doesn’t need to wait on shipping from abroad:
- Infusion epoxies, including INF-114 paired with INF-211, INF-212 and INF-213 hardeners
- Laminating epoxies for hand layup work
- Structural adhesives, including the ADV-176/276 cartridge, for bonding and repair
- Tooling and low-density putty, including TLG-625 for mould and jig work
Why Choose PRO-SET
Fabricators choose PRO-SET for a few consistent reasons. It gives full control over cure time through a range of hardener speeds. It works with many fibers and core materials, rather than being suited to just one type of build. In practice, that reduces waste and saves time on a project, since less gets remixed or reworked. And now it’s available locally in Malta at DockShop, instead of needing to be shipped in from abroad.
Frequently Asked Questions
What industries actually use PRO-SET epoxy?
Marine, automotive, aerospace, construction, renewable energy and recreational sport all use PRO-SET, since the same underlying strength-to-weight and consistency benefits apply across each of them.
Is PRO-SET only for professional fabricators, or can smaller workshops use it too?
Both. The range comes in pack sizes from small hardener tins up to bulk 25kg resin, so a small repair shop and a larger production workshop can each buy the quantity a job actually needs.
What’s the difference between PRO-SET’s infusion and laminating epoxies?
Infusion epoxy suits processes like vacuum infusion and RTM, where resin needs to flow through fabric already in a mould. Laminating epoxy suits hand layup work instead, where you apply resin directly as each layer goes down.
PRO-SET Epoxy at DockShop
Whether the job is marine fabrication, automotive composites, aerospace tooling or structural panel production, PRO-SET gives the strength, consistency and ease of use professionals need. DockShop stocks the full PRO-SET range locally, with technical support available for choosing the right resin and hardener combination for a given project.
