PRO-SET epoxy aerospace Malta MRO teams and composite fabricators rely on is built to a different standard than general-purpose epoxy. Aircraft parts need strength without added weight, and every batch has to cure the same way every time. DockShop now stocks the full PRO-SET range locally, covering infusion resin, laminating epoxy, structural adhesive and tooling systems for aerospace composite work in Malta.
Why PRO-SET Suits Aerospace Work
Aerospace composites need three things that ordinary epoxy doesn’t reliably deliver. Strength has to come without added weight, since every extra gram costs fuel and payload over an aircraft’s life. Parts have to resist fatigue under constant vibration and stress. And curing has to be consistent, batch after batch, for certified performance. PRO-SET is manufactured under ISO 9001:2015 quality standards, so batch-to-batch consistency isn’t left to chance.
Beyond that baseline, PRO-SET’s infusion resin has very low viscosity for clean fiber wet-out. It also bonds well to carbon fiber, fiberglass and aramid fabrics, and is compatible with aerospace core materials like foam and honeycomb. So higher-temperature hardener options extend that further into heat-exposed applications.
Where PRO-SET Is Used in Aerospace
- Interior and structural panels: wall and ceiling panels, lavatory and galley units, lightweight seat components and structural honeycomb-bonded panels.
- Composite airframe and fairings: engine cowlings, ducting, winglets, flaps, spoilers, access panels and landing gear covers.
- Mould and tooling fabrication: aerospace part moulds for wet layup or pre-preg work, structural jigs and fixtures, and vacuum-forming moulds for composite shells. PRO-SET TLG-625 tooling putty suits this kind of mould and jig work well.
PRO-SET for MRO and Aviation Repair
Malta has several maintenance, repair and overhaul operations, and MRO work has its own demands. In particular, an epoxy system needs to be easy to apply under real workshop conditions. It also has to be reliable under pressure, and compliant with technical specs. PRO-SET is used for bonding aircraft fairings and panels, composite skin repair, and refurbishment of interiors and structural inserts. PRO-SET INF-114 resin, paired with a hardener at the right cure speed, covers most of this infusion and repair work.
Choosing the Right PRO-SET System
INF-114 is the infusion resin for structural composite parts, and it pairs with three hardener speeds. INF-211 gives a medium cure. INF-212 extends working time for larger layups. INF-213 covers larger-volume work instead. For internal bonding and structural repair, ADV-176/276 applies as a structural adhesive cartridge, and TLG-625 tooling putty handles mould and fixture work.
Frequently Asked Questions
Is PRO-SET certified for aerospace-grade work?
PRO-SET is manufactured under ISO 9001:2015 quality standards, giving consistent, batch-to-batch performance. That consistency is what aerospace composite work depends on, since a variable cure isn’t acceptable in structural or certified parts.
What makes an infusion resin suitable for aircraft composites?
Low viscosity matters most. A resin like INF-114 flows through reinforcement fabric cleanly during vacuum infusion. That reduces air pockets, so the result is a stronger, more consistent laminate than a thicker resin would give.
Can PRO-SET be used for both new-build parts and MRO repair work?
Yes. The same INF-114 resin system covers new composite panel fabrication. It also covers repair work like rebonding fairings or fixing delaminated skin. So an MRO team doesn’t need a separate system for each job.
PRO-SET Epoxy Aerospace Range at DockShop
Malta is home to a growing number of aerospace companies, from MRO hubs to component manufacturers. DockShop stocks the full PRO-SET range locally, so hangar teams, prototype workshops and aerospace fabricators don’t need to import epoxy systems from abroad. Infusion resin, hardeners at three cure speeds, structural adhesive and tooling putty are all in stock, with technical support for choosing the right system for a given part.
