In industrial and commercial environments, safety underfoot is non-negotiable. Whether it’s a warehouse, a workshop, or a busy loading area, one slip can lead to injury, downtime and liability. Non-skid paint Malta facilities use solves this directly. DockShop supplies KiwiGrip for exactly this kind of commercial and industrial use, alongside its better-known role on boat decks.
Why Industrial Facilities Use Non-Skid Paint
Workplaces like factories, machine shops and distribution centres often deal with slick concrete floors, oily work zones, and metal walkways or loading ramps. These surfaces turn genuinely dangerous when wet or dirty. A non-skid coating cuts the risk of slip-and-fall incidents significantly. That keeps a team safer, and helps a site meet its obligations under Malta’s Occupational Health and Safety Authority regulations.
Slips and falls are consistently one of the leading causes of workplace injury. Most are preventable with a straightforward surface-traction fix rather than a change in procedure.
Where Non-Skid Paint Gets Used Commercially
- Loading docks and freight areas
- Entryways and walkways, especially in wet conditions
- Maintenance platforms, scaffolding and mezzanines
- Machinery zones and service bays
- Storage unit flooring and warehouse aisles
- Commercial kitchens, cold storage and food prep areas
Whether the surface is steel, aluminium or concrete, KiwiGrip bonds securely. So it adds long-term grip across all of them.
Why KiwiGrip Works for Industrial Use
In practice, several features that make KiwiGrip a strong choice on boat decks carry over directly to industrial floors:
- One-part, easy-to-apply formula: no complicated mixing or added grit. Just roll it on with the specialised KiwiGrip roller.
- Water-based and low-VOC: suited to indoor use, with no harsh fumes and easier compliance with air-quality standards.
- Customisable texture: from fine grip to aggressive traction, adjusted during application to match each area’s foot traffic.
- Durable and easy to clean: holds up against daily wear, machinery movement and chemical spills. Cleans up with just soap and water.
Not Just for Boats
KiwiGrip made its name in the marine world, but its non-skid technology suits far more than boat decks. Manufacturers, commercial property managers, equipment operators, safety officers and facility designers in Malta all use it for the same reason boat owners do. They need a surface that stays grippy under real-world conditions, not just one that looks good on day one.
Frequently Asked Questions
Is KiwiGrip suitable for indoor industrial use?
Yes. Being water-based and low-VOC, it suits indoor application better than solvent-based non-skid coatings. There’s none of the strong fumes that come with some alternatives.
Does KiwiGrip work on concrete as well as boat decks?
Yes. It bonds to steel, aluminium and concrete alike, which is why it suits warehouse floors, loading docks and walkways as well as fibreglass and gelcoat decks.
How does industrial non-skid paint compare to anti-slip tape or mats?
A rolled-on coating like KiwiGrip covers a full surface permanently, rather than needing individual strips replaced as they wear or peel. For large areas like warehouse aisles or loading ramps, that usually works out more durable and lower-maintenance.
Non-Skid Paint Malta Facilities Order From DockShop
DockShop stocks KiwiGrip for both marine and industrial use, in grey and cream, along with the specific rollers the coating needs for the right texture. For boat deck applications specifically, see the full guide to non-slip deck coating.
